Browse car audio and vehicle electronics, home audio, professional and DJ audio, portable electronics, and installation accessories. Contact our Brampton team for product availability or compatibility questions.

Shop Electronics & Audio
Filter

Showing 37–48 of 48 resultsSorted by latest

Sort:
Show:
12%
DS18 SB10A 10″ 350W RMS Loaded Amplified Shallow Subwoofer Enclosure

DS18 SB10A 10″ 350W RMS Loaded Amplified Shallow Subwoofer Enclosure

Original price was: $441.99.Current price is: $388.99.
Check availability
Add to cart
12%
CT Sounds TROPO-2X10D4 Dual 10” 1300W RMS Loaded Tropo Series Ported Car Subwoofer Box

CT Sounds TROPO-2X10D4 Dual 10” 1300W RMS Loaded Tropo Series Ported Car Subwoofer Box

Original price was: $533.99.Current price is: $471.99.
Check availability

CT Sounds TROPO-2X10D4 is a loaded dual-10-inch ported subwoofer enclosure rated at 1,300 W RMS in the retailer listing. It contains two TROPO bass drivers rather than an empty box. Confirm the combined terminal impedance, amplifier capability and cargo-space clearance before ordering.

Add to cart
12%
CT Sounds TROPO-1X10D2 Single 10” 650W RMS Loaded Tropo Series Ported Car Subwoofer Box

CT Sounds TROPO-1X10D2 Single 10” 650W RMS Loaded Tropo Series Ported Car Subwoofer Box

Original price was: $319.99.Current price is: $282.99.
Check availability

CT Sounds TROPO-1X10D2 is a loaded, ported enclosure containing one 10-inch TROPO subwoofer, rated at 650 W RMS in the retailer listing. The D2 voice-coil designation affects the resulting amplifier load. Measure cargo space and confirm terminal impedance before choosing a monoblock amplifier.

Add to cart
22%
AudioControl SPK-V10 Spike Series 10″ 500W RMS Vented Enclosure

AudioControl SPK-V10 Spike Series 10″ 500W RMS Vented Enclosure

Original price was: $1,099.95.Current price is: $859.95.
Check availability

The AudioControl SPK-V10 is a 10-inch, 500 W RMS Spike Series loaded vented enclosure. This is a ported cabinet supplied with a Spike subwoofer installed, not the loose SPK-10S2/S4 driver. Its port and internal volume form a matched bass enclosure. Confirm the loaded woofer's impedance and speaker terminal arrangement with the exact product revision, plus port and hatch clearance.

Add to cart
23%
AudioControl SPC-W10 Space Series 10″ 400W RMS Sealed Wedge Enclosure

AudioControl SPC-W10 Space Series 10″ 400W RMS Sealed Wedge Enclosure

Original price was: $899.95.Current price is: $699.95.
Check availability

The AudioControl SPC-W10 is a 10-inch, 400 W RMS Space Series loaded sealed wedge enclosure. The cabinet is supplied with a Space Series low-profile ten-inch subwoofer installed, unlike an empty box. Its sealed wedge form suits certain smaller cargo-area installations. Match available vehicle space and the installed driver's impedance to your amplifier; do not assume the 400 W rating applies at every load.

Add to cart
19%
Alpine W-DB10V Dual 10″ 500W RMS Loaded Subwoofer Enclosure

Alpine W-DB10V Dual 10″ 500W RMS Loaded Subwoofer Enclosure

Original price was: $699.00.Current price is: $568.00.
Check availability

The Alpine W-DB10V is a vented wedge subwoofer enclosure preloaded with two 10-inch Bass Series W10S4 drivers. The pair of single 4-ohm speakers provides 250 W RMS handling per driver, or 500 W RMS combined. Alpine lists a 24–200 Hz frequency response, polypropylene/mica cones and poly-foam surrounds. The black-carpeted MDF cabinet measures 30.5 × 18.25 × 15.5 inches and weighs about 75 lb. An external amplifier is required; verify the final wiring impedance and cargo clearance.

Add to cart
44%
Alpine SS-SB10 Single 10” 300W RMS S-Series Shallow Preloaded Subwoofer Enclosure

Alpine SS-SB10 Single 10” 300W RMS S-Series Shallow Preloaded Subwoofer Enclosure

Original price was: $799.00.Current price is: $448.00.
Check availability

The Alpine SS-SB10 is a sealed shallow-profile enclosure with a preloaded 10-inch S-Series subwoofer rated at 300 W RMS. The rugged polymer cabinet measures 18.5 inches wide, 4.5 inches high and 12.5 inches deep. A neodymium motor and Gen2 DD-Linear circuit provide 11 mm one-way linear excursion, while the finished enclosure presents a 2-ohm speaker load. Four foam-padded adjustable steel brackets are supplied. A separate 2-ohm-compatible amplifier is required.

Add to cart
15%
Alpine SBV-10-WRA Pre-Loaded 10″ 300W RMS Subwoofer for 2007-2018 Jeep Wrangler JK

Alpine SBV-10-WRA Pre-Loaded 10″ 300W RMS Subwoofer for 2007-2018 Jeep Wrangler JK

Original price was: $699.00.Current price is: $598.00.
Check availability

The Alpine SBV-10-WRA is an IP66-rated, preloaded 10-inch sealed subwoofer enclosure for the 2007–2018 Jeep Wrangler JK Unlimited four-door. Its vehicle-specific cabinet fits beneath the front passenger seat rails and is designed to remain in place without added mounting hardware when factory carpeting is retained. Alpine rates the passive system at 300 W RMS / 900 W maximum with a 2-ohm load and 45–200 Hz response. A separate suitable amplifier is required.

Add to cart
19%
Alpine S2-SB10V Halo Series 10″ 600W RMS Linkable Ported Subwoofer Enclosure

Alpine S2-SB10V Halo Series 10″ 600W RMS Linkable Ported Subwoofer Enclosure

Original price was: $799.00.Current price is: $648.00.
Check availability

The Alpine S2-SB10V is a ported 10-inch Halo enclosure preloaded with a next-generation S-Series subwoofer. Rated at 600 W RMS / 1,800 W peak, it has dual 4-ohm voice coils prewired in parallel for a 2-ohm final load. Its 3/4-inch MDF cabinet measures 16 × 12.7 × 14.5 inches and includes a black carpet finish with metallic front trim. ProLink allows a second compatible enclosure to be connected with an optional bracket. An external amplifier is required.

Add to cart
35%
Alpine S2-SB10 PrismaLink S2-Series Sealed Subwoofer Enclosure with 10″ 600W RMS Subwoofer and RGB Lighting

Alpine S2-SB10 PrismaLink S2-Series Sealed Subwoofer Enclosure with 10″ 600W RMS Subwoofer and RGB Lighting

Original price was: $849.00.Current price is: $558.00.
Check availability

The Alpine S2-SB10 is a sealed 10-inch S-Series PrismaLink subwoofer enclosure with integrated RGBW trim lighting. It comes preloaded with an S2-W10D4 subwoofer, factory-wired to a 2-ohm load, and is rated at 600 W RMS / 1,800 W peak. The wedge cabinet measures 14.5 × 13 × 11.25 inches. An IR lighting remote is included, and the optional KTX-LK10 kit can link matching boxes. It is passive: an external subwoofer amplifier is required.

Add to cart
21%
Alpine RS-SB10 Single 10” 600W RMS R-Series Shallow Preloaded Subwoofer Enclosure

Alpine RS-SB10 Single 10” 600W RMS R-Series Shallow Preloaded Subwoofer Enclosure

Original price was: $1,499.00.Current price is: $1,198.00.
Check availability

The Alpine RS-SB10 is a sealed, shallow-profile enclosure preloaded with one 10-inch R-Series subwoofer. Alpine rates the passive system at 600 W RMS with a 29–200 Hz response and a factory-wired 2-ohm load. It measures approximately 21.15 × 5.25 × 16 inches and includes a steel mesh grille, modular rubber feet and mounting brackets. An appropriate external amplifier is required. Check cargo or under-seat clearance and whether the chosen orientation allows safe ventilation.

Add to cart
19%
Alpine Halo R2-SB10V Single 10″ Preloaded Subwoofer Enclosure

Alpine Halo R2-SB10V Single 10″ Preloaded Subwoofer Enclosure

Original price was: $1,099.00.Current price is: $898.00.
Check availability

The Alpine Halo R2-SB10V is a preloaded ported enclosure with one 10-inch R-Series subwoofer rated at 750 W RMS. The included dual 4-ohm voice-coil driver is wired in parallel to a 2-ohm enclosure load, so an external amplifier rated for 2 ohms is required. Alpine specifies a 26–200 Hz response and a 36 Hz box tuning frequency. The carpeted MDF cabinet measures approximately 16 inches wide by 12.68 inches high by 14.5 inches deep.

Add to cart

Filter Products

Product Status

Browse Categories

Filter by price